PBE-980 - Sends XGA plus audio over structured cable

PBE-980 XGA + Audio Send / Receive

Features:

The Sourcerer PBE-980 can send VGA-type computer signals plus mono audio over CAT-5 UTP structured cable (and above) distances in excess of 100m, maintaining excellent signal quality and keeping degradation to a minimim. Both ends are powered.

The PBE-980 takes advantage of the widespread use of CAT-5 and structured cable for telecom and computer applications and avoids the need for costly and disruptive video and audio cable runs. Both UTP unshielded and STP shielded twisted pair CAT-5, CAT-5e, CAT-6, CAT-7 and even some CAT-3 cables are suitable.

The PBE-980 (Sender and Receiver) are both active devices (plug-top mains power supplies are included).

PBE-980S XGA + Audio sending end

The PBE-980S (Sender) takes VGA computer video (RGBHV) plus a mono audio signal and provides two local buffered outputs of both VGA and audio for local monitoring and daisy-chaining for multi-destination applications, avoiding the need for an expensive splitter at the local end. There is an HD-15M connector (plug) for VGA input and HD15-F connectors (sockets) for VGA output together with 3.5mm mini jack sockets for audio inputs and outputs. A green LED indicates power and a yellow LED shows when there is a valid VGA input signal present.


PBE-980R XGA + Audio receiving end

The PBE-980R (Receiver) takes the signal on the CAT-5 / structured cable and provides 2 outputs of both VGA and audio which can be used for display or for daisy-chaining to further destinations. A small slide switch provides appropriate delay / equalization depending on distance. Housed in small strong metal cases, the PBE-980 boxes take up virtually no space and can easily be attached to the rear of monitors etc. There are HD15-F connectors (sockets) for VGA output together with 3.5mm mini jack sockets for audio outputs. A green LED indicates power and a yellow LED shows when there is a valid VGA input signal present on the structured cable (CAT-5).


Applications include information kiosks, call-centre screens, message screens, classrooms, auditoriums, monitoring stations, conference rooms, high resolution remote monitors, home theatre, video projection systems - not forgetting multi-screen VGA distribution of our V-400V.VGA NTP-locked VGA clocks (see the Time section of the website) which runs on a PC and provides analogue clock (with hands) plus digital time with or without date on TFT and plasma screens.

Specifications
Product Versions:
PBE-980 Active VGA set - VGA plus mono audio - 2 outputs VGA + audio at both the sending and receiving ends
PBE-980S Sending / computer end (active) - 2 buffered outputs VGA + audio and CAT-5 sender
PBE-980R Receiving end (active) - 2 buffered outputs VGA + audio and UTP cable compensation adjustment
Please note that the PBE-980 is only sold as a complete set - 1 PBE-980S and 1 PBE-980R complete with plug-top mains power supplies
Connections:
PBE-980S - SENDING END
VGA input HDD15 male connector
Audio input 3.5mm mini jack socket
VGA outputs (2) HDD15 female connectors
Local VGA output drive capability Approx 1-2m for local use
Audio outputs (2) 3.5mm mini jack sockets
Structured cable output RJ45 8-way socket
Power input 9VDC coaxial from plug-top PSU (centre pin +ve)
PBE-980R - RECEIVING END
VGA outputs (2) HDD15 female connectors
Audio outputs (2) 3.5mm mini jack sockets
Structured cable input RJ45 8-way socket
Power input 9VDC coaxial from plug-top PSU (centre pin +ve)
Performance:
Bandwidth - video VGA flat to 60MHz RGBHV
Bandwidth - audio 50Hz-20kHz -3dB at -3dBm (consumer levels)
Local VGA output drive capability Approx 1-2m for local use
Cable correction / equalization (receiving end) 4-position slide switch compensates for 0-35-80-110m approx
VGA modes supported VGA / SVGA / XGA / SXGA all modes (up to 1280x1024). Please note that the received resolution achieved depends on graphics resolution chosen, distance and installation issues such as the use of bonded pair cable
VGA monitor types Most including TFT & EPA Energy Star
Structured cable type CAT-5e or better recommended - UTP or STP - bonded pair cable preferred
Physical:
Power supply 9VDC 600mA coaxial connector - centre pin +ve
Dimensions Each 105mm x 75mm x 20mm - including connectors (4.2" x 3" x 0.8" approx)
Net weight 0.3kg (10oz approx)