EasyMix-HD - HD A/B Video Mixer
Features:
- 2-Input HD Broadcast A/B Vision Mixer
- Dissolve/Mix, Cut and Fade-to-Black transitions
- Simple RCM-1 Remote Control Panel
- GPI Control
- 1-U rack with bypass relay for up to 4x HD boards (HD-RK4)
- Also available - HD-LOGO Logo Generator and HD-DSK Downstream Keyer
- Multi-Layer capability by cascading EasyMix cards using the Preview Input to provide 3x HD-inputs and 3x HD-SD Outputs
- Works with HD and SD signals
- Low-Cost
The EasyMix-HD A/B Video Mixer is part of a new family of low-cost modular HD/SD products that all fit into a 1-U rack-frame system. The HD-RK4 rack has relay bypass in case of mains failure, making them suitable for on-air and broadcast use. EasyMix boards can be used in systems with HD-LOGO Logo Generator/Inserters and HD-DSK Downstream linear keyers with up to 4 cards housed in a single 1-U rackframe.
Applications:
The EasyMix-HD is a simple SD/HD vision mixer which has has many uses including:
- Emergency Mixing
- Video Server Changeover
- On-Air applications
- Post-production
SPECIFICATIONS: |
Video/Processing: |
Programme Inputs |
SD/HD Input A - BNC-F 75 Ohm Terminating - with 1-line autophasing
SD/HD Input B - BNC-F 75 Ohm Terminating - with 1-line autophasing
SD/HD Preview Input - BNC-F 75 Ohm Terminating - with 1-line autophasing |
Genlock Input |
Black and Burst for SD or Tri-Level for HD - with loop-through (feeds all cards in HD-RK4
Horizontal and Vertical phase adjustment |
Programme Outputs |
2x SD/HD Programme Output BNC-F 75 Ohm - with relay bypass in rackframe |
Preview Output |
SD/HD Preview Output BNC-F 75 Ohm Terminating - with relay bypass in rackframe |
Standards |
SD - 270MBits/s, HD - 1.485 Gbits/s
- 625i SD (EBU BT601)
- 525i SD (SMPTE 125M)
- 1080i/50 HD (SMPTE 274M-6)
- 1080i/59.94 HD (SMPTE 274M5)
- 720p/50 HD (SMPTE 296-M3)
- 720p/59.94 (SMPTE 296-M2)
- FCC Part 15 and CE Compliant
|
Internal Processing |
12-bit |
Embedded Audio |
Transparent to Aux Data and Embedded Audio
Audio is routed un-mixed |
|
Control: |
GPI |
6x GPI Inputs - pull-to-ground
5x GPI Tally Outputs - open collector |
Dedicated Control Panel |
RCM1 for Source Selection / Tansition / Fade-to-Black |
EDH |
EDH Insertion on output |
Transitions |
Cut and Fade (programmable) |
Downstream |
Fade-to-Black (programmable) on Programme Output |
|
Power Requirements: |
Consumption |
90VA max DC Low-voltage from external switch-mode module (supplied) |
External PSU |
100-250VAC 50-60Hz with IEC mains input |
Connector |
5mm / 2mm Coaxial - +ve inner |
Backup |
Dual Redundant PSUs available (optional - PW90) |
|
Physical: |
Operating Temperature |
0-50C (32-122F) |
Relative Humidity |
0% - 90% non-condensing |
Size |
1-U x 19" Rackmount - 483 x 133 x 450 deep (19" x 5.25" x 15") approx |
Weight |
4Kg (6lbs) approx |
|